Emperor Tresco Headboard
The beautiful Tresco is one of our more classic designs.
£929.00 (VAT incl.)
TREEH
Build Options
Fabric
RequiredFabric
- Velvet
- Weave
- Faux Wool
- Wool
- Customers Own Material
- Boucle
- Cream
- White
- Brown
- Natural
- Grey
- Blue
- Navy
- Duck Egg
- Teal
- Pink
- Orange
- Green
- Red
- Yellow
- Purple
- Plain
- Stripe
- Floral
- Ditsy
- Geometric
- Check/Plaid
- Spots
CLEAR
Width
RequiredWidth
6ft 6ins (200cm)
Small Emperor Width.(No Difference in Price)
7ft (213.4cm)
Large Emperor Width.(No Difference in Price)
Border
RequiredBorder
Matching Border with Self Pipe
Border and piping in same fabric.(No Difference in Price)
Matching Border with Contrast Pipe HC
Contrast piping in House Cotton Vanilla.(+ £35.00)
Contrast Border with Contrast Pipe HC
Border and piping in House Cotton Vanilla.(+ £40.00)
Matching Border with Contrast Pipe COM
Piping in your own fabric.(No Difference in Price)
Contrast Border with Contrast Pipe COM
Border & piping in your own fabric.(No Difference in Price)
Essential Add-ons
None SelectedPillowstop
Our headboards are designed to sit on top of the mattress so a pillow stop will remain largely unseen behind the mattress. Ideal if your headboard is to be seen from the side, it fills the gap between the headboard and the bed base. Edged and finished with matching fabric. Covers and hides the traditional mounting struts.
Without Pillowstop
Headboard starts at top of mattress.(No Difference in Price)
With Pillowstop
Dimensions: Height 8ins (20cm) x Depth 1.5ins (4cm).(+ £79.00)
Fixing Method
Plywood Mounting Struts: Traditional strong plywood moulded struts are supplied with all orders unless the Easy fit wall Mounting pack is specified. Full instructions are supplied and it is a simple job to swing the struts into position. Ideal if you want the flexibility to move your bed around with the headboard attached. Wall Mounting Pack The easy fit MDF mounting plate (shown below) will be supplied, located on the back of the headboard for you to remove and fix to the wall. A very neat and smart fitting method, with no gap behind the headboard as all the fixings are inset into the back. Full instructions are supplied and it is a simple 10 minute DIY job. Perfect for larger and taller headboards. Once installed your headboard won’t move. It will be fitted to the wall and will not be attached to the bed in any way. Easy to lift off its mountings for cleaning or to remove covers etc.
Plywood Moulded Struts
Struts attach via the plastic headed bolts of your divan base.(No Difference in Price)
Wall Mounting Pack
Wooden split batten kit, a simple DIY job to mount to your wall.(+ £29.00)
Fabric Protector
This water based solution has no smell and will not affect the look or the feel of your fabric. It works brilliantly. Applied by us to your finished products after final inspection. Repels all oil and water based stains from upholstery. Retains dirt on the surface instead of it soaking into the fabric. If you are buying multiple items and would like Fabric Protector to be applied to all items, you need to apply Fabric Protector for each item.
No Fabric Protector
No fabric treatment applied.(No Difference in Price)
Apply Fabric Protector
We apply it for you in our workshop.(+ £25.00)
About this product
The gently sloping lines and indented piping, combined with a pleated border, gives this headboard a vintage feel.
The Tresco is available with a Contrast Pleated Border in House Cotton Vanilla.
What is a pillowstop?
Our pillowstop is an additional upholstered section fitted below the headboard. It sits behind your mattress, still allowing your headboard and bed to sit flush to the wall. All visible areas of the pillowstop are upholstered in the same fabric as your headboard.
Please see image for reference (the last image in the gallery on the left).
Dimensions of the pillowstop:
- Height - 8ins (20cm)
- Depth - 1.5ins (4cm)
Upon request, this model can be transformed into a fully upholstered bed - just ask.
If you have any queries, email us or give us a call on 01291 628216.
Dimensions
Please note; the 'official' Emperor width varies across the industry, so we offer both 6ft 6ins (200cm) and 7ft (213.4cm). To ensure a perfect fit, please select the correct width for your bed base.
Height taken from top of mattress - 32ins (82cm)
Width - 6ft 6ins (200cm) or 7ft (213.4cm)
Depth - 3.5ins (9cm)
Please note; As everything is hand made please allow an upholstery tolerance of +/- 1 cm on all dimensions.
Using your own fabric
Providing that your fabric has a useable width of at least 130cm;
Just send us 3.5 METRES of fabric for the Self Piped option.
If you have a directional fabric which will need to be joined, we need the meterage stated above + 1 vertical pattern repeat.
If you would like to supply your own fabric for Contrast Piping, you will need to send us an additional 1.3 METRES of material.
If you are opting to add a Pillowstop to your headboard, please supply an extra 0.9 METRES of fabric.
PLEASE NOTE: Lead time starts from the moment we receive your fabric, trim or any additional components that are required to make your order.
----------
All fabrics must comply with Fire Regulation BS5852 for Cigarette & Match.
There are 3 ways to achieve this:
1. The most cost efficient way to do this is with your fabric supplier, they will ensure that it is accompanied by the necessary certificates.
2. If your fabric has a composition that is 75% or more natural fibre, it may be possible to use a fire retardant interliner. The interliner charge is £79, which you can purchase HERE. We would need proof of the fabric composition when you send it to us.
3. If no certificate is supplied and your material is less than 74% natural fibres, we can arrange fire retardancy treatment for you. The charge for this is £25.00 per metre plus a £30.00 postage and administration fee, and the treatment requires a minimum of 3m of fabric. Fabric treatment usually takes about 10 days and this may extend your delivery date by that amount. This can be arranged with us via email once you have placed your order.
----------
On receipt of your fabric, we will contact you for further instruction if required and then your order will be released into production.
When sending us your material (either from yourself or directly from your supplier), could you kindly;
- Attach your name
- Attach your order reference number, which you will receive via email after placing your order
- Indicate the correct side of the fabric
And finally, the address you need to send your fabric to is;
The Headboard Workshop Ltd,
Units 10-11 St David's Industrial Estate,
Pengam,
Blackwood,
NP12 3SW.
We will confirm receipt of your fabric when it arrives with us. All excess material will be returned to you with your order.
If you have any queries, email us or give us a call on 01291 628216.
We received our headboard yesterday and are so happy with it - thank you! The whole process has been seamless from start to finish and super speedy too.
Beautiful headboard, team were very helpful all through the process to make sure we had what we wanted with our own material and delivery was much sooner than we expected!
I received my headboard this evening - just an email to say how thrilled I am with it, it’s beautifully made and even better than I imagined. Thanks so much!
Just to say we are extremely please with both our bed and the service from The Headboard Workshop. From my initial enquiry to delivery everything has been amazing so thank you.
Fabrics
Dimensions
Finishes
Essential Addons
- Velvet
- Weave
- Faux Wool
- Wool
- Customers Own Material
- Boucle
- Cream
- White
- Brown
- Natural
- Grey
- Blue
- Navy
- Duck Egg
- Teal
- Pink
- Orange
- Green
- Red
- Yellow
- Purple
- Plain
- Stripe
- Floral
- Ditsy
- Geometric
- Check/Plaid
- Spots
CLEAR
Width
6ft 6ins (200cm)
Small Emperor Width.(No Difference in Price)
7ft (213.4cm)
Large Emperor Width.(No Difference in Price)
Border
Matching Border with Self Pipe
Border and piping in same fabric.(No Difference in Price)
Matching Border with Contrast Pipe HC
Contrast piping in House Cotton Vanilla.(+ £35.00)
Contrast Border with Contrast Pipe HC
Border and piping in House Cotton Vanilla.(+ £40.00)
Matching Border with Contrast Pipe COM
Piping in your own fabric.(No Difference in Price)
Contrast Border with Contrast Pipe COM
Border & piping in your own fabric.(No Difference in Price)
Pillowstop
Our headboards are designed to sit on top of the mattress so a pillow stop will remain largely unseen behind the mattress. Ideal if your headboard is to be seen from the side, it fills the gap between the headboard and the bed base. Edged and finished with matching fabric. Covers and hides the traditional mounting struts.
Without Pillowstop
Headboard starts at top of mattress.(No Difference in Price)
With Pillowstop
Dimensions: Height 8ins (20cm) x Depth 1.5ins (4cm).(+ £79.00)
Fixing Method
Plywood Mounting Struts: Traditional strong plywood moulded struts are supplied with all orders unless the Easy fit wall Mounting pack is specified. Full instructions are supplied and it is a simple job to swing the struts into position. Ideal if you want the flexibility to move your bed around with the headboard attached. Wall Mounting Pack The easy fit MDF mounting plate (shown below) will be supplied, located on the back of the headboard for you to remove and fix to the wall. A very neat and smart fitting method, with no gap behind the headboard as all the fixings are inset into the back. Full instructions are supplied and it is a simple 10 minute DIY job. Perfect for larger and taller headboards. Once installed your headboard won’t move. It will be fitted to the wall and will not be attached to the bed in any way. Easy to lift off its mountings for cleaning or to remove covers etc.
Plywood Moulded Struts
Struts attach via the plastic headed bolts of your divan base.(No Difference in Price)
Wall Mounting Pack
Wooden split batten kit, a simple DIY job to mount to your wall.(+ £29.00)
Fabric Protector
This water based solution has no smell and will not affect the look or the feel of your fabric. It works brilliantly. Applied by us to your finished products after final inspection. Repels all oil and water based stains from upholstery. Retains dirt on the surface instead of it soaking into the fabric. If you are buying multiple items and would like Fabric Protector to be applied to all items, you need to apply Fabric Protector for each item.
No Fabric Protector
No fabric treatment applied.(No Difference in Price)
Apply Fabric Protector
We apply it for you in our workshop.(+ £25.00)