If you would like to use your own material, please read the instructions below carefully and then click on the "Select My Own Material" button at the bottom.

Providing that your fabric has a useable width of at least 130cm;

For the 24ins and 30ins heights, we need 1.8 METRES of fabric for the Backtacked & Self Piped options.

For the 45ins height, we need 2.5 METRES of fabric for the Backtacked & Self Piped options.

If you have a directional fabric which will need to be joined, we need the meterage stated above + 1 pattern repeat.

If you would like to supply your own fabric for Contrast Piping, you will need to send us an additional 1.3 METRES of material.

If you are opting to add a Pillowstop to your headboard, please supply an extra 0.7 METRES of fabric.

PLEASE NOTE: Lead time starts from the moment we receive your fabric, trim or any additional components that are required to make your order.

---------

All fabrics must comply with Fire Regulation BS5852 for Cigarette & Match.

There are 3 ways to achieve this:

1. The most cost efficient way to do this is with your fabric supplier, they will ensure that it is accompanied by the necessary certificates.

2. If your fabric has a composition that is 75% or more natural fibre, it may be possible to use a fire retardant interliner. The interliner charge is £59, which you can purchase HERE. We would need proof of the fabric composition when you send it to us.

3. If no certificate is supplied and your material is less than 74% natural fibres, we can arrange fire retardancy treatment for you. The charge for this is £25.00 per metre plus a £30.00 postage and administration fee. Fabric treatment usually takes about 10 days and this may extend your delivery date by that amount. This can be arranged with us via email once you have placed your order.

----------

On receipt of your fabric, we will contact you for further instruction if required and then your order will be released into production.

When sending us your material (either from yourself or directly from your supplier), could you kindly;

• Attach your name
• Attach your order reference number, which you will receive via email after placing your order
• Indicate the correct side of the fabric

And finally, the address you need to send your fabric to is;

The Headboard Workshop Ltd, 
Units 10-11 St David's Industrial Estate, 
Pengam, 
Blackwood, 
NP12 3SW.

We will confirm receipt of your fabric when it arrives with us. All excess material will be returned to you with your order.

If you have any queries, email us or give us a call on 01291 628216.